Keyboard and Gamepads
You may not have access to a guitar, especially since they've been increasing in price and are not always available in your region. But you don't need a guitar! You can play either with a gamepad or with your keyboard.
Keyboard
The keyboard is the default controller that Clone Hero uses. By default, the keyboard bindings are:
You can change these by pressing Space on the main menu to open the control mapper and customize your controls.
You need to press Start and select a profile using Strum Up/Down and Green before you can navigate the menus.
For settings, press Green to select the option, then use Strum Up/Down to change it, then use Green to confirm your selection.
If you're on keyboard and certain key combinations don't work, your keyboard has issues with "Key Rollover" or "Keyboard Ghosting" The only fixes are either rebinding keys in hopes you keyboard will register them, or buying an anti-ghosting keyboard. Learn more from this video.
NOTE: Keyboard can only be assigned to player 1, you cannot use a guitar for player 1 and keyboard for player 2. Additionally, if you are using a guitar that is emulating a keyboard, you cannot also use a keyboard for another player.
Gamepads
Most gamepads will work with Clone Hero with minimal configuration. You will need to assign the bindings in the controls menu, be sure you are using the right side of the controls table (Gamepad) and not the left side (Keyboard).
Gamepad play is considerably more difficult than keyboard or guitar play, however it is still possible to do.
If you are trying to use a gamepad with the v1 version of the game, please be aware that the R2/L2 (RT/LT) buttons do not assign correctly.
A workaround is to download v0.23.2.2 and map controls there, then go back to v1.0.4080 where they should stay mapped (may not work with some recently-released controllers).
v0.23.2.2 download: https://clonehero.net/releases/v0.23.2.2/
You may also need to wait until the bind countdown completes before pressing any trigger, this is to ensure that the "Press" is what is bound instead of the "Release."
Please Be Aware: As of 1.0.4080-final, the PS5 gamepad (known as the Dual Sense) will not work with this workaround. You may be able to make it work by using the program DS4Windows which converts your PS device into an XInput device. Installing and configuring this should make it possible to use the above workaround.
Gamepad Mode & All Taps
When using a Gamepad or a Keyboard, you are advised to turn on either "Gamepad Mode" in the profile settings, or "All Taps" in the song modifier list.
Gamepad Mode
Once you have selected a profile, press "Start" again and scroll down, then enable "Gamepad Mode". This makes the game strum every time you press a fret button, allowing you to play without strumming.
All Taps
Once you select a song, open the Modifier list and scroll down to All Taps. Select it, and either press the red button or select Ready to confirm the selection. This will turn every note into a Tap note, allowing you to play without strumming. However, this may make the game too easy, as it this option doesn't strum when you press a fret.
